AmAir® 300X AmAir®HT
1", 2" and 4" Extended Surface Pleated Panel Filters AmAir
- Expanded metal pleat support grid (AmAir 300X)
- High loft media increases dust holding capacity
- Rated MERV 7 (25-30% average ASHRAE efficiency)
- Excellent primary filter to prevent dust build-up on heating and cooling coils, fans, and ductwork
- Excellent prefilter for higher efficiency filters
- Directly interchangeable with disposable panel filters, media pads in metal frames, or permanent filters used in built-up filter banks and side access systems. No modifications are necessary to frames or latches
- 4" filters have pleat stabilizers to ensure uniform spacing and increase rigidity (AmAir300X)
AmAir 300X filters are constructed with AAF’s totally unitized, double wall, die-cut box, beverage board frame. The media pack is bonded inside the frame at all points of contact. AmAir 300X filters are built rugged for durability and reliability under tough service conditions.
Superior Strength
AmAir 300X filters are extremely strong and durable, with all components rigidly bonded into a totally unitized construction. They will not rack or deteriorate under normal operating conditions, including high moisture applications.
An expanded metal grid laminated to the air leaving side of the media creates more consistent pleat shape and maintains uniform pleat spacing. Expanded metal also increases the stability of the pleat pack, reducing media flutter during operation.
The media pack support retainers, which are an integral part of the frame, are bonded to the pleats on both the air entering and the air leaving sides. This increases rigidity and also helps maintain proper spacing between pleats for maximum dust holding capacity while minimizing resistance.
AmAir® HT High Temperature
AmAir HT is designed for applications with continuous operating temperatures up to 500˚F (260˚C). AmAir HT is rated U.L. Class 1 with 30-35% efficiency. The frame is an aluminized steel U-channel, with the media pack bonded to the inside on all four edges.An expanded aluminized steel faceguard is spot welded inside the frame on the air leaving side to retain the media pack at elevated temperatures. AmAir HT is made with microglass media.
